SN74HC4066DR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 14 terminations. This electronic part offers high-quality output due to its 4 channels. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. There are 14 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Search with 74HC4066 if you are looking for analog multiplexer variants. It has an internal resistance of 85Ohm. The functions of 14 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 2μA. A voltage of 2V~6V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 2μA. There is a voltage range of 5V operating voltages for the electrical part. The transfer of data can be performed over 30MHz bandwidths.

SN74HC4066DR Features

4 Channels
Switch Circuit: SPST - NO
2μA Supply Current
Bandwidth: 30MHz

SN74HC4066DR Applications

There are a lot of Texas Instruments
SN74HC4066DR Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems