SN74HC4851DRG4 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature extended to -40°C~125°C TA. In total, 16 terminations have occurred. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. There are 1 circuits in this multiplexer. Search with 74HC4851 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 195Ohm. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. The analog switch ic is of the Single supply type and is cost-effective. 2V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 2μA. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. There are SEPARATE OUTPUT outputs on this analog switch ic. Its conductivity is 8-bit.

SN74HC4851DRG4 Features

1 Channels
2μA Supply Current
8-Bit

SN74HC4851DRG4 Applications

There are a lot of Texas Instruments SN74HC4851DRG4 Analog Switches & Multiplexers ICs applications.

• SONET
• Cell phones
• Routers
• Video switching
• Cellular phones
• Digital cross connects (DSX-1)
• Video signal routing
• Multi-Line E1 Interface Cards
• SDH
• USB 1.1 signal switching circuits