SN74HC4852N Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have a ratio of 4:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. A 3V voltage supply should turn on and run the electronic component. There are 16 pins injected into the electronic part body. Multiplexers built on a SP4T switching circuit are built. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with 74HC4852. Analog switches have 650Ohm internal resistance. The datasheets for the 16 pins explain the functions. A voltage higher than 6V should not normally be supplied to the switches. The analog switch ic is of the Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 2μA. Using a single voltage supply, this switch device consumes 2V~6V volts. The analogue multiplexer has 4 outputs. 4-bit conductivity is possible.

SN74HC4852N Features

Switch Circuit: SP4T
2μA Supply Current
4-Bit

SN74HC4852N Applications

There are a lot of Texas Instruments SN74HC4852N Analog Switches & Multiplexers ICs applications.

• Sample-and-hold systems
• Intelligent PBX
• Battery-powered systems
• Imaging
• Transmit
• Communications systems
• Mechanical reed relay replacement
• Cross Connects
• Modems
• Voice over IP/DSL – Integrated Access Devices, Smart