SN74HC4852PW Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. If the voltage supply is 3V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. A SP4T switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 2. Try searching for the analog switch ic with 74HC4852 if you are looking for variants. Analog switches have 650Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. Single supply type digital switch with a low cost. 2V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 2μA. This analogue multiplexer requires a voltage of 2V~6V when it drains from a single voltage supply. It is possible to operate 8 inputs. This digital multiplexer has 4 outputs. 4-bit operation is possible.

SN74HC4852PW Features

Switch Circuit: SP4T
2μA Supply Current
4-Bit

SN74HC4852PW Applications

There are a lot of Texas Instruments SN74HC4852PW Analog Switches & Multiplexers ICs applications.

• Voice over IP/DSL – Integrated Access Devices, Smart
• Battery Powered Systems
• Industrial control systems
• Fiber In The Loop (FITL)
• Wireless Local Loop
• PDH Multiplexers
• Sample hold systems
• SDH
• HDTV
• Cable PC