ADG801BRTZ-REEL7 Overview

As the electronic part is packed in SOT-23-6, international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Extended operating temperature around -40°C~125°C TA. Total terminations are 6. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 6 pins. Unlike digital switches, these are based on SPST - NO switching circuits. ADG801 can be used to search for analog multiplexer variants. There is 300mOhm internal resistance in this digital multiplexer. For details about the functions of 6 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. The analog switch ic is of the Single supply type and is cost-effective. It is recommended to use 1.8V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 1nA current. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 1μA. There are various bandwidths available for data transfer.

ADG801BRTZ-REEL7 Features

1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 12MHz

ADG801BRTZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG801BRTZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Data switching
• Cell phones
• Cable PC
• Audio/video switches
• RGB switches
• Optical Applications
• 65 V DACs
• Avionics and Military Systems
• Audio signal routing
• Channel Banks