SN74HC574APWR Overview

The package is in the form of 20-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tape & Reel (TR) package. There is a Tri-State, Non-Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. The FPGA belongs to the 74HC series. In order for it to function properly, its output frequency should not exceed 84MHz. A total of 1 elements are present. As a result, it consumes 8μA quiescent current and is not affected by external forces. Currently, there are 20 terminations. The 74HC574 family contains it. The power source is powered by 5V. Its input capacitance is 3pFfarads. In this case, the D flip flop belongs to the HC/UHfamily. This board has 20 pins. The maximal supply voltage (Vsup) reaches 6V. Normal operation requires a supply voltage (Vsup) above 2V. This flip flop has a total of 2ports.

SN74HC574APWR Features

Tape & Reel (TR) package
74HC series
20 pins

SN74HC574APWR Applications

There are a lot of Texas Instruments SN74HC574APWR Flip Flops applications.

• Clock pulse
• Automotive
• Convert a momentary switch to a toggle switch
• Count Modes
• Buffer registers
• Circuit Design
• Computers
• Functionally equivalent to the MC10/100EL29
• Balanced Propagation Delays
• Event Detectors