SN74HCT273DWG4 Overview

In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The Tubepackage contains it. This output is configured with Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. It should not exceed 37MHzin its output frequency. D latch consists of 1 elements. It consumes 8μA of quiescent A total of 20 terminations have been made. You can search similar parts based on 74HCT273. The power source is powered by 5V. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. An electronic device belonging to the family HCTcan be found here. Surface Mount mounts this electronic component. With its 20pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 8bits in its design. In order for the device to operate, it requires 5V power supplies. The supply voltage should be maintained at 5V for high efficiency. 8input lines are available for you to choose from.

SN74HCT273DWG4 Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

SN74HCT273DWG4 Applications

There are a lot of Texas Instruments SN74HCT273DWG4 Flip Flops applications.

• Computing
• CMOS Process
• Storage Registers
• Count Modes
• Frequency Divider circuits
• Divide a clock signal by 2 or 4
• Storage registers
• Common Clocks
• Dynamic threshold performance
• Bounce elimination switch