CD74HCT377ME4 Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. As configured, the output uses Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. It is at -55°C~125°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74HCT series. There should be no greater frequency than 50MHzon its output. The list contains 1 elements. A total of 20 terminations have been made. It is a member of the 74HCT377 family. The power supply voltage is 5V. JK flip flop input capacitance is 10pF farads. The electronic device belongs to the HCTfamily. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The design is based on 8bits. 8 circuits are used to achieve its superior flexibility. The power supply is 5V. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It operates with 3 output lines. 8μAquiescent current consumed. There is also a characteristic of WITH HOLD MODE.

CD74HCT377ME4 Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

CD74HCT377ME4 Applications

There are a lot of Texas Instruments CD74HCT377ME4 Flip Flops applications.

• Synchronous counter
• Storage registers
• Storage Registers
• Guaranteed simultaneous switching noise level
• Balanced 24 mA output drivers
• Digital electronics systems
• Frequency Divider circuits
• Data storage
• Latch-up performance
• Registers