SN74HCT374DWR Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). The Cut Tape (CT)package contains it. This output is configured with Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. This logic flip flop is classified as type D-Type. It belongs to the 74HCTseries of FPGAs. It should not exceed 40MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 8μA quiescent current. Terminations are 20. You can search similar parts based on 74HCT374. The power source is powered by 5V. Its input capacitance is 3pFfarads. HCTis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 8 Bits. The superior flexibility is achieved through the use of 8 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. A power supply of 5Vis required to operate it. The flip flop contains 2ports. The supply voltage should be maintained at 5V for high efficiency. As a result of its output current of 6mA, it is very flexible in terms of design. 3input lines are available for you to choose from.

SN74HCT374DWR Features

Cut Tape (CT) package
74HCT series
20 pins
8 Bits
5V power supplies

SN74HCT374DWR Applications

There are a lot of Texas Instruments SN74HCT374DWR Flip Flops applications.

• EMI reduction circuitry
• Supports Live Insertion
• Matched Rise and Fall
• QML qualified product
• Reduced system switching noise
• Registers
• Test & Measurement
• Convert a momentary switch to a toggle switch
• Data Synchronizers
• Counters