SN74HCT74DG4 Overview
In the form of SOIC, it has been packaged. A total of 2elements are contained within it. The number of terminations is 14. An input voltage of 5Vpowers the D latch. In this case, the D flip flop belongs to the HCTfamily. There is an electronic component mounted in the way of Surface Mount. 14pins are included in its design. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. In view of its reliability, this D flip flop is a good fit for TUBE. In order for the device to operate, it requires 5V power supplies. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The number of input lines is 4. In this case, the high level output current is set to -4mA. 4mAis set as the low level output current. There should be a temperature below 85°Cduring operation. In order for the system to operate properly, the temperature should be higher than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. There is a maximum voltage support of 5.5V. A frequency of 46MHzcan be achieved. D FLIP-FLOPis the logic IC it uses. There are 2 functions available on this T flip flop. A total of 14 pins are present on this device.
SN74HCT74DG4 Features
14 pins
5V power supplies
2 Functions
14 pin count
SN74HCT74DG4 Applications
There are a lot of Texas Instruments
SN74HCT74DG4 Flip Flops applications.
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
