SN74LS374DWRG4 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. As part of the package Tape & Reel (TR), it is embedded. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.75V~5.25Vis required for its operation. Currently, the operating temperature is 0°C~70°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74LS series. A frequency of 50MHzshould not be exceeded by its output. D latch consists of 1 elements. As a result, it consumes 40mA quiescent current. It has been determined that there have been 20 terminations. If you search by 74LS374, you will find similar parts. A voltage of 5V is used to power it. LSis the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It is designed with 8bits. Its flexibility is enhanced by 8 circuits. Due to its reliability, this T flip flop is well suited for TR. The D latch operates on 5V volts. There are 2 ports embedded in the flip flops. Optimal efficiency requires a supply voltage of 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74LS374DWRG4 Features
Tape & Reel (TR) package
74LS series
20 pins
8 Bits
5V power supplies
SN74LS374DWRG4 Applications
There are a lot of Texas Instruments SN74LS374DWRG4 Flip Flops applications.
- High Performance Logic for test systems
- Data Synchronizers
- Power down protection
- Test & Measurement
- Pattern generators
- Balanced 24 mA output drivers
- Latch-up performance
- Supports Live Insertion
- Safety Clamp
- Memory
