COMMON I/O PINS; MIXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT
Technology
TTL
Terminal Position
DUAL
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
2.54mm
Pin Count
16
Operating Supply Voltage
5V
Number of Elements
1
Temperature Grade
COMMERCIAL
Max Supply Voltage
5.25V
Min Supply Voltage
4.75V
Load Capacitance
30pF
Number of Bits
8
Propagation Delay
60 ns
Turn On Delay Time
60 ns
Family
LS
Logic Function
Shift Register
Direction
Unidirectional
Output Characteristics
3-STATE
Output Polarity
TRUE
Logic IC Type
PARALLEL IN SERIAL OUT
Trigger Type
POSITIVE EDGE
Power Supply Current-Max (ICC)
53mA
Number of Input Lines
9
fmax-Min
35 MHz
Width
7.62mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
SN74LS597NE4 Product Details
SN74LS597NE4 Overview
PDIP is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. The part operates at 5V voltage. A total of 1 elements can be found on this part. It is equipped with a pin count of 16. It is recommended that the mount should be done by Through Hole. There is an electronic component in the LS. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: COMMON I/O PINS; MIXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT. In the device, there are 9 input lines that are available for use. A total of 8 bits are present on the IC chip. It has a total of zero pins. At temperatures below 70°C, it is recommended for use. Ideally, it should not fall below 0°C. A voltage of 5.25V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 4.75V.
SN74LS597NE4 Features
With 16 pins Operate supply voltage at 5V
SN74LS597NE4 Applications
There are a lot of Texas Instruments SN74LS597NE4 Shift Registers applications.