SN74LS73ADRG4 Overview

It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). As part of the package Tape & Reel (TR), it is embedded. There is a Differentialoutput configured with it. In the configuration of the trigger, Negative Edgeis used. It is mounted in the way of Surface Mount. With a supply voltage of 4.75V~5.25V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. Logic flip flops of this type are classified as JK Type. It belongs to the 74LSseries of FPGAs. There should be no greater frequency than 45MHzon its output. As a result, it consumes 6mA quiescent current and is not affected by external forces. 14terminations have occurred. The object belongs to the 74LS73 family. A voltage of 5V is used to power it. An electronic device belonging to the family LScan be found here. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 14 pins. A Negative Edgeclock edge trigger is used in this device. It is part of the FF/Latchesbase part number family. Using 2 circuits, it is highly flexible. In view of its reliability, this D flip flop is a good fit for TR. A power supply of 5Vis required to operate it. High efficiency requires the supply voltage to be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 8mA.

SN74LS73ADRG4 Features

Tape & Reel (TR) package
74LS series
14 pins
5V power supplies

SN74LS73ADRG4 Applications

There are a lot of Texas Instruments SN74LS73ADRG4 Flip Flops applications.

• Frequency division
• Individual Asynchronous Resets
• Latch
• Computers
• Single Down Count-Control Line
• Memory
• Shift registers
• 2 – Bit synchronous counter
• Supports Live Insertion
• Consumer