SN74LV174ADBRE4 Overview

As a result, it is packaged as 16-SSOP (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). This output is configured with Non-Inverted. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~5.5Vvolts. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. The 74LVseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 180MHz. The element count is 1 . Despite external influences, it consumes 20μAof quiescent current. The number of terminations is 16. It is a member of the 74LV174 family. A voltage of 2.5V is used to power it. The input capacitance of this JK flip flopis 1.7pF farads. This D flip flop belongs to the family of LV/LV-A/LVX/H. It is mounted by the way of Surface Mount. 16pins are included in its design. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 5.5V. Normally, the supply voltage (Vsup) should be above 2V. The superior flexibility is achieved through the use of 7 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The D latch runs on a voltage of 3.3V volts. The output current of 12mA makes it feature maximum design flexibility. 2input lines are available for you to choose from.

SN74LV174ADBRE4 Features

Tape & Reel (TR) package
74LV series
16 pins
3.3V power supplies

SN74LV174ADBRE4 Applications

There are a lot of Texas Instruments SN74LV174ADBRE4 Flip Flops applications.

• Buffer registers
• Parallel data storage
• Memory
• Set-reset capability
• Registers
• Frequency Dividers
• Differential Individual
• Storage Registers
• Bounce elimination switch
• Communications