SN74LV174ADBRG4 Overview
16-SSOP (0.209, 5.30mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 2V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74LVseries contain this type of chip. It should not exceed 180MHzin its output frequency. The list contains 1 elements. There is 20μA quiescent consumption. Terminations are 16. The 74LV174family includes it. It is powered by a voltage of 2.5V . There is 1.7pF input capacitance for this T flip flop. This D flip flop belongs to the family of LV/LV-A/LVX/H. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 16. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. The flip flop is designed with 6bits. Vsup reaches its maximum value at 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 2V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The D latch operates on 3.3V volts. As a result of its output current of 12mA, it is very flexible in terms of design. This input has 6lines.
SN74LV174ADBRG4 Features
Tape & Reel (TR) package
74LV series
16 pins
6 Bits
3.3V power supplies
SN74LV174ADBRG4 Applications
There are a lot of Texas Instruments SN74LV174ADBRG4 Flip Flops applications.
- High Performance Logic for test systems
- ATE
- Bounce elimination switch
- Buffer registers
- Instrumentation
- Buffered Clock
- EMI reduction circuitry
- Power down protection
- Cold spare funcion
- Common Clocks
