SN74LV175ADBR Overview
The package is in the form of 16-SSOP (0.209, 5.30mm Width). It is contained within the Tape & Reel (TR)package. In the configuration, Differentialis used as the output. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a 2V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74LVseries contain this type of chip. Its output frequency should not exceed 165MHz Hz. D latch consists of 1 elements. Despite external influences, it consumes 20μAof quiescent current. 16terminations have occurred. If you search by 74LV175, you will find similar parts. Power is supplied from a voltage of 2.5V volts. The input capacitance of this T flip flop is 1.4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In terms of electronic devices, this device belongs to the LV/LV-A/LVX/Hfamily of devices. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. It operates from 3.3V power supplies. Featuring the maximum design flexibility, it has an output current of 12mA . It has 2lines.
SN74LV175ADBR Features
Tape & Reel (TR) package
74LV series
16 pins
3.3V power supplies
SN74LV175ADBR Applications
There are a lot of Texas Instruments SN74LV175ADBR Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Test & Measurement
- Consumer
- EMI reduction circuitry
- Shift registers
- Safety Clamp
- Data storage
- Divide a clock signal by 2 or 4
- Bus hold
- ESCC
