SN74LV374ANSR Overview

20-SOIC (0.209, 5.30mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. Currently, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74LVseries FPGA. Its output frequency should not exceed 170MHz Hz. A total of 1elements are present in it. Terminations are 20. This D latch belongs to the family of 74LV374. An input voltage of 2.5Vpowers the D latch. There is 2.9pF input capacitance for this T flip flop. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. Surface Mount mounts this electronic component. The 20pins are designed into the board. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. There is a 5.5Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 2V. In order to achieve its superior flexibility, 8 circuits are used. Considering the reliability of this T flip flop, it is well suited for TR. There are 3.3V power supplies attached to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With an output current of 16mA, this device offers maximum design flexibility. As of now, there are 2input lines. 20μAquiescent current consumed.

SN74LV374ANSR Features

Tape & Reel (TR) package
74LV series
20 pins
8 Bits
3.3V power supplies

SN74LV374ANSR Applications

There are a lot of Texas Instruments SN74LV374ANSR Flip Flops applications.

• Digital electronics systems
• Cold spare funcion
• Common Clocks
• QML qualified product
• Data transfer
• Buffered Clock
• ESCC
• Memory
• Set-reset capability
• Load Control