SN74LV374APWR Overview

In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. It is contained within the Cut Tape (CT)package. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis used as the supply voltage. Temperature is set to -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LVseries FPGA. Its output frequency should not exceed 170MHz. In total, it contains 1 elements. It consumes 20μA of quiescent It has been determined that there have been 20 terminations. It is a member of the 74LV374 family. Power is provided by a 2.5V supply. Input capacitance of this device is 2.9pF farads. LV/LV-A/LVX/His the family of this D flip flop. Surface Mount mounts this electronic component. The 20pins are designed into the board. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. Flip flops designed with 8bits are used in this part. Vsup reaches 5.5V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility of this product is achieved by using 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. A total of 3.3V power supplies are needed to run it. A total of 2ports are embedded in the D flip flop. Featuring the maximum design flexibility, it has an output current of 16mA . It is reported that there are 2 input lines.

SN74LV374APWR Features

Cut Tape (CT) package
74LV series
20 pins
8 Bits
3.3V power supplies

SN74LV374APWR Applications

There are a lot of Texas Instruments SN74LV374APWR Flip Flops applications.

• Computing
• Frequency Divider circuits
• Data storage
• Shift Registers
• Asynchronous counter
• Clock pulse
• Bus hold
• Single Down Count-Control Line
• Count Modes
• Differential Individual