SN74LV374ATDBG4 Overview
20-SSOP (0.209, 5.30mm Width)is the packaging method. As part of the package Tube, it is embedded. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Temperature is set to -40°C~125°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74LV series. In order for it to function properly, its output frequency should not exceed 150MHz. In total, there are 1 elements. This process consumes 2μA quiescents. Terminations are 20. It is a member of the 74LV374 family. The power source is powered by 2.5V. Input capacitance of this device is 4pF farads. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. The 20pins are designed into the board. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 2V. Its superior flexibility is attributed to its use of 8 circuits. The power supply is 3.3V. This flip flop has a total of 2ports. Its output current of 16mAallows for maximum design flexibility.
SN74LV374ATDBG4 Features
Tube package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374ATDBG4 Applications
There are a lot of Texas Instruments SN74LV374ATDBG4 Flip Flops applications.
- Individual Asynchronous Resets
- Frequency Dividers
- Clock pulse
- EMI reduction circuitry
- Communications
- Bus hold
- Buffered Clock
- Data transfer
- Common Clocks
- 2 – Bit synchronous counter
