SN74LV374ATDWG4 Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. The Tubepackage contains it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. A temperature of -40°C~125°C TAis used in the operation. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74LVseries FPGA. You should not exceed 150MHzin the output frequency of the device. In total, there are 1 elements. As a result, it consumes 2μA quiescent current and is not affected by external forces. Terminations are 20. The 74LV374family includes it. It is powered by a voltage of 2.5V . Its input capacitance is 4pF farads. This D flip flop belongs to the family of LV/LV-A/LVX/H. The electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. The flip flop is designed with 8bits. Vsup reaches its maximum value at 5.5V. A normal operating voltage (Vsup) should remain above 2V. The superior flexibility of this product is achieved by using 8 circuits. An electrical current of 3.3V volts is applied to it. The D flip flop has no ports embedded. With an output current of 16mA, this device offers maximum design flexibility.

SN74LV374ATDWG4 Features

Tube package
74LV series
20 pins
8 Bits
3.3V power supplies

SN74LV374ATDWG4 Applications

There are a lot of Texas Instruments SN74LV374ATDWG4 Flip Flops applications.

• Divide a clock signal by 2 or 4
• Synchronous counter
• Cold spare funcion
• CMOS Process
• ATE
• Data transfer
• Bus hold
• Digital electronics systems
• Event Detectors
• High Performance Logic for test systems