SN74HCT273DWE4 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. There is a Non-Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. FPGAs belonging to the 74HCTseries contain this type of chip. A frequency of 37MHzshould be the maximum output frequency. In total, there are 1 elements. There is 8μA quiescent consumption. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74HCT273family make up this object. A voltage of 5V is used to power it. This JK flip flop has a 3pFfarad input capacitance. In this case, the D flip flop belongs to the HCTfamily. The electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. It is designed with 8bits. Despite its superior flexibility, it relies on 8 circuits to achieve it. It runs on 5Vvolts of power. The supply voltage should be maintained at 5V for high efficiency. It is reported that there are 3 input lines.
SN74HCT273DWE4 Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT273DWE4 Applications
There are a lot of Texas Instruments SN74HCT273DWE4 Flip Flops applications.
- Communications
- Automotive
- ATE
- Digital electronics systems
- Control circuits
- Consumer
- CMOS Process
- Set-reset capability
- Test & Measurement
- Individual Asynchronous Resets
