SN74LV4052ADRG4 Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 16. By its 2 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. A SP4T switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Try searching for the analog switch ic with 74LV4052 if you are looking for variants. There is 100Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. 2V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 20μA. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. A 8 input needs to be operated. This switch operates within the bandwidth of 50MHz. Its conductivity is 4-bit.

SN74LV4052ADRG4 Features

2 Channels
Switch Circuit: SP4T
20μA Supply Current
Bandwidth: 50MHz
4-Bit

SN74LV4052ADRG4 Applications

There are a lot of Texas Instruments SN74LV4052ADRG4 Analog Switches & Multiplexers ICs applications.

• Wireless Local Loop
• DSLAMs
• Avionics and Military Systems
• Digital cross connects (DSX-1)
• Modems
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Multi-Line E1 Interface Cards
• SONET/SDH ADM
• Battery-powered systems
• High-Voltage