SN74LV4066ADBR Overview

Shipping overseas is convenient due to the electrical component's packing in 14-SSOP (0.209, 5.30mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. 14 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 14 pins. Multiplexers built on a SPST - NO switching circuit are built. Try searching for the analog switch ic with 74LV4066 if you are looking for variants. As far as internal resistance is concerned, it has 75Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 2V. This digital switch can be operated with a current of 20μA. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. Put voltage above 20μA on the multiplexer to cause damage. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. 50MHz-bandwidths can be used to transfer data between multiplexers.

SN74LV4066ADBR Features

4 Channels
Switch Circuit: SPST - NO
20μA Supply Current
Bandwidth: 50MHz

SN74LV4066ADBR Applications

There are a lot of Texas Instruments
SN74LV4066ADBR Analog Switches & Multiplexers ICs applications.

• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions