DUAL Analog Switches MAKE-BEFORE-BREAK 14 Pins 2.3V SOIC
SOT-23
SN74LV4066ADRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Package / Case
SOIC
Number of Pins
14
Weight
129.387224mg
JESD-609 Code
e4
Moisture Sensitivity Level (MSL)
1
Number of Terminations
14
Resistance
75Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Subcategory
Multiplexer or Switches
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
2.3V
Terminal Pitch
1.27mm
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Pin Count
14
Qualification Status
Not Qualified
Power Supplies
2.5/5V
Temperature Grade
INDUSTRIAL
Number of Channels
1
Max Supply Voltage
5.5V
Min Supply Voltage
2V
Operating Supply Current
20μA
Max Supply Current
20μA
Throw Configuration
SPST
Propagation Delay
10 ns
Turn On Delay Time
25 ns
Number of Inputs
4
Supply Type
Single
Bandwidth
50MHz
Turn-Off Delay Time
25 ns
Off-state Isolation-Nom
40 dB
On-state Resistance Match-Nom
6Ohm
Switching
MAKE-BEFORE-BREAK
Normal Position
NO
Height Seated (Max)
1.75mm
Length
8.65mm
RoHS Status
RoHS Compliant
Lead Free
Lead Free
SN74LV4066ADRG4 Product Details
SN74LV4066ADRG4 Overview
Due to its SOIC packaging, the electronic part is convenient for international shipping. Total terminations are 14. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. The electronic part body is injected with 14 pins. A 75Ohm internal resistance characterizes this multiplexer. You can find the functions of the 14 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A cost-effective Single supply type analogue multiplexer. A low voltage of 2V should be applied to the electronic component. An operating current of 20μA would be sufficient for this switch device. Putting voltage greater than 20μA on the multiplexer may cause damage. It is possible to operate 4 inputs. In 50MHz-bandwidths, data can be transferred. During operation, the multiplexer should not be exposed to a temperature above 85°C.
SN74LV4066ADRG4 Features
1 Channels 20μA Supply Current Bandwidth: 50MHz
SN74LV4066ADRG4 Applications
There are a lot of Texas Instruments SN74LV4066ADRG4 Analog Switches & Multiplexers ICs applications.