SN74LV574ARGYR Overview

It is embeded in 20-VFQFN Exposed Pad case. It is contained within the Cut Tape (CT)package. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~5.5Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. JK flip flop belongs to the 74LVseries of FPGAs. There should be no greater frequency than 175MHzon its output. There are 1 elements in it. It consumes 20μA of quiescent Terminations are 20. This D latch belongs to the family of 74LV574. A voltage of 2.5V provides power to the D latch. Its input capacitance is 1.8pF farads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. It is mounted in the way of Surface Mount. It is designed with 20 pins. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 8bits in its design. The maximal supply voltage (Vsup) reaches 5.5V. Normally, the supply voltage (Vsup) should be above 2V. To achieve this superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TR. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With an output current of 16mA, it is possible to design the device in any way you want. Currently, there are 3 lines of input.

SN74LV574ARGYR Features

Cut Tape (CT) package
74LV series
20 pins
8 Bits

SN74LV574ARGYR Applications

There are a lot of Texas Instruments SN74LV574ARGYR Flip Flops applications.

• Storage Registers
• Shift registers
• Data Synchronizers
• ESD performance
• Single Down Count-Control Line
• Count Modes
• Cold spare funcion
• EMI reduction circuitry
• CMOS Process
• Counters