SN74HC377N Overview

The item is packaged in 20-DIP (0.300, 7.62mm)cases. It is included in the package Tube. T flip flop is configured with an output of Non-Inverted. The trigger it is configured with uses Positive Edge. Through Holemounts this electrical part. The JK flip flop operates at a voltage of 2V~6V. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74HCseries contain this type of chip. It should not exceed 64MHzin its output frequency. A total of 1 elements are present. There are 20 terminations,Members of the 74HC377family make up this object. The D flip flop is powered by a voltage of 5V . The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the HC/UHfamily of D flip flop. There is an electronic part mounted in the way of Through Hole. This board is designed with 20pins on it. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. This flip flop is designed with 8 Bits. 6Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. The power supply is 2/6V. For high efficiency, the supply voltage should be set to 5V. Its output current of 5.2mAallows for maximum design flexibility. 3input lines are available for you to choose from. As a result, it consumes 8μA of quiescent current without being affected by external factors. It is also characterized by WITH HOLD MODE. There are 8 channels available.

SN74HC377N Features

Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

SN74HC377N Applications

There are a lot of Texas Instruments SN74HC377N Flip Flops applications.

• Consumer
• Power down protection
• Convert a momentary switch to a toggle switch
• Dynamic threshold performance
• ESD performance
• Clock pulse
• ESCC
• 2 – Bit synchronous counter
• Patented noise
• Data storage