SN74LV74APWG4 Overview
The flip flop is packaged in a case of TSSOP. D latch consists of 2 elements. Terminations are 14. The power source is powered by 2.5V. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. Electronic part Surface Mountis mounted in the way. With its 14pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. Due to its reliability, this T flip flop is well suited for TUBE. The D latch runs on a voltage of 3.3V volts. It is set to -12mAfor the high level output current. It is set to 12mAfor the low level output current. If the operating temperature is lower than 125°C, it is recommended. It should be higher than -40°Cwhen the system is operating. Normally, it operates with a voltage of 2VV as its minimum supply voltage. It supports a maximum supply voltage of 5.5V volts. This frequency can be achieved 140MHz. In this case, it uses a D FLIP-FLOP logic IC. It is equipped with 2 functions . The D latch is equipped with 14 pins. As a result of its output current of 12mA, it is very flexible in terms of design.
SN74LV74APWG4 Features
14 pins
3.3V power supplies
2 Functions
14 pin count
SN74LV74APWG4 Applications
There are a lot of Texas Instruments
SN74LV74APWG4 Flip Flops applications.
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
