SN74LVC1G175DRYR Overview

The flip flop is packaged in a case of 6-UFDFN. Package Tape & Reel (TR)embeds it. T flip flop uses Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. Powered by a 1.65V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74LVC series. It should not exceed 175MHzin terms of its output frequency. There have been 6 terminations. The object belongs to the 74LVC1G175 family. Power is supplied from a voltage of 1.8V volts. JK flip flop input capacitance is 3pF farads. It is a member of the LVC/LCX/Zfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 6 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. There are 1bits in this flip flop. There is a 5.5Vmaximum supply voltage (Vsup). Its superior flexibility is attributed to its use of 1 circuits. Due to its reliability, this T flip flop is well suited for TR. A power supply of 3.3Vis required to operate it. As a result, it consumes 10μA of quiescent current without being affected by external factors.

SN74LVC1G175DRYR Features

Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies

SN74LVC1G175DRYR Applications

There are a lot of Texas Instruments SN74LVC1G175DRYR Flip Flops applications.

• QML qualified product
• Instrumentation
• Single Down Count-Control Line
• Computers
• Balanced 24 mA output drivers
• Shift Registers
• 2 – Bit synchronous counter
• Data Synchronizers
• Data storage
• Supports Live Insertion