4.2ns, 5ns SPST - NO 10Ohm DUAL Analog Switches 74LVC1G66 100nA 3.3V 5-TSSOP, SC-70-5, SOT-353
SOT-23
SN74LVC1G66DCKJ Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
5-TSSOP, SC-70-5, SOT-353
Number of Pins
5
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
5
Resistance
10Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexer or Switches
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Base Part Number
74LVC1G66
Power Supplies
3.3V
Max Supply Voltage
5.5V
Min Supply Voltage
1.65V
Operating Supply Current
10μA
Nominal Supply Current
1μA
Max Supply Current
10μA
Throw Configuration
SPST
Turn On Delay Time
4.2 ns
Number of Inputs
1
Supply Type
Single
Bandwidth
1.25MHz
Turn-Off Delay Time
5 ns
-3db Bandwidth
300MHz
On-State Resistance (Max)
10Ohm
Multiplexer/Demultiplexer Circuit
1:1
Current - Leakage (IS(off)) (Max)
100nA
Channel Capacitance (CS(off), CD(off))
6pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
4.2ns, 5ns
Voltage - Supply, Single (V+)
1.65V~5.5V
Normal Position
NO
Length
2mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
SN74LVC1G66DCKJ Product Details
SN74LVC1G66DCKJ Overview
Presented in 5-TSSOP, SC-70-5, SOT-353, this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 5. It is safe to turn on and run the electronic component with a 3.3V voltage supply. SPST - NO switching circuits are used in these analog switch ics. Use 74LVC1G66 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 10Ohm. Please refer to the datasheets for 5 pins functions. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. For this multiplexer to operate, 10μA current would be sufficient. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A voltage higher than 10μA may cause damage to the switch multiplexer. Among the inputs that can be operated are the 1 inputs. It is possible to transfer data over a 1.25MHz-bandwidth.
SN74LVC1G66DCKJ Features
Switch Circuit: SPST - NO 10μA Supply Current -3db Bandwidth: 300MHz Bandwidth: 1.25MHz
SN74LVC1G66DCKJ Applications
There are a lot of Texas Instruments SN74LVC1G66DCKJ Analog Switches & Multiplexers ICs applications.