SN74LVC1G66DCKRG4 Overview

The electrical component comes in 5-TSSOP, SC-70-5, SOT-353 packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. Total terminations are 5. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. It is part of the design of the 5 series that this electronic component is included. A SPST - NO switching circuit is used for these analog switches. Use 74LVC1G66 to search for variants of the digital switches. A 10Ohm internal resistance characterizes this multiplexer. You can find the functions of the 5 pins in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. 1.65V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 10μA would be sufficient for this switch device. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 10μA. With a SPDT analog IC integrated into the board. In 300MHz-bandwidths, data can be transferred.

SN74LVC1G66DCKRG4 Features

1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 300MHz

SN74LVC1G66DCKRG4 Applications

There are a lot of Texas Instruments SN74LVC1G66DCKRG4 Analog Switches & Multiplexers ICs applications.

• MP3 players
• Low-Voltage
• Medical Instrumentation
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Video switching
• PDH Multiplexers
• Voice over IP/DSL – Integrated Access Devices, Smart
• DVD-R
• Signal routing between systems
• ISDN NT1/TA