SN74LVC1G66DRYR Overview

The electronic component is convenient to ship overseas because it is packed in a 6-UFDFN. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. 6 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching with 74LVC1G66 to find analog multiplexer variants. In this multiplexer, the internal resistance is 10Ohm. For functions related to 6 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Single supply type digital switch with a low cost. It is recommended to use 1.65V as the lowest voltage for the electrical part. For this digital switch to work, 10μA current would suffice. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. Putting voltage greater than 10μA on the multiplexer may cause damage. With a SPDT analog IC integrated into the board. In 300MHz-bandwidths, data can be transferred.

SN74LVC1G66DRYR Features

1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 300MHz

SN74LVC1G66DRYR Applications

There are a lot of Texas Instruments SN74LVC1G66DRYR Analog Switches & Multiplexers ICs applications.

• Switching Systems
• Precision test equipment
• Power routing
• Signal routing between systems
• PBX interfaces
• Cross Connects
• Industrial and process control systems
• Communications systems
• E1 Multiplexer
• Microprocessor Controlled Analog Systems