SN74LVC1G66DSFR Overview

The electrical component comes in 6-XFDFN packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -40°C~85°C TA. A total of 6 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. A SPST - NO switching circuit is used for these analog switches. Use 74LVC1G66 to search for variants of the digital switches. Analog switches have 10Ohm internal resistance. To find out what the 6 pins do, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. A low voltage of 1.65V should be applied to the electronic component. The switch device would be able to operate with 10μA current. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A voltage higher than 10μA may cause damage to the switch multiplexer. An analog IC with the number SPDT is integrated into this board. There are various bandwidths available for data transfer.

SN74LVC1G66DSFR Features

1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 300MHz

SN74LVC1G66DSFR Applications

There are a lot of Texas Instruments SN74LVC1G66DSFR Analog Switches & Multiplexers ICs applications.

• Relay replacements
• HDTV
• PCMCIA cards
• Digital access cross connects
• Frame Relay Equipment
• Access Concentrators
• Private Branch Exchange (PBX)
• Precision instrumentation
• Modems
• Remote wireless modules