SN74LVC2G66DCUTG4 Overview

Shipping overseas is convenient with the electronic component packed in 8-VFSOP (0.091, 2.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there are 8 terminations. The electronic part delivers high-quality output through its 2 channels. An 2.3V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 8 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with 74LVC2G66 if you're looking for variants. The internal resistance of this digital multiplexer is 10Ohm. The functions of 8 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexers or Switches. normally, users should not supply switches with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. In order for the electronic part to function properly, the lowest voltage should be 1.65V. This multiplexer would work with 10μA current. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 10μA. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The transfer of data can be performed over 300MHz bandwidths.

SN74LVC2G66DCUTG4 Features

2 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 300MHz

SN74LVC2G66DCUTG4 Applications

There are a lot of Texas Instruments SN74LVC2G66DCUTG4 Analog Switches & Multiplexers ICs applications.

• Public switching systems
• Data Acquisition Systems
• New designs requiring multiplexer functions
• Fiber to the Home
• PDH Multiplexers
• Remote wireless modules
• Wireless Local Loop
• Signal routing between systems
• Cross Connects
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8