SN74LVC2G74DCTRE4 Overview

The item is packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~5.5Vvolts. -40°C~125°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LVC series. You should not exceed 200MHzin its output frequency. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74LVC2G74 family. It is powered by a voltage of 1.8V . Its input capacitance is 5pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. This electronic part is mounted in the way of Surface Mount. The 8pins are designed into the board. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 1bits in this flip flop. There is a 5.5Vmaximum supply voltage (Vsup). The superior flexibility is achieved through the use of 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. It operates from 3.3V power supplies. It consumes 10μA current. 2 gates are contained in its basic building block.

SN74LVC2G74DCTRE4 Features

Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates

SN74LVC2G74DCTRE4 Applications

There are a lot of Texas Instruments SN74LVC2G74DCTRE4 Flip Flops applications.

• Consumer
• Balanced Propagation Delays
• Test & Measurement
• ATE
• Computers
• CMOS Process
• Memory
• Bounce elimination switch
• Automotive
• Supports Live Insertion