SN74LVC374ADBRE4 Overview

The package is in the form of 20-SSOP (0.209, 5.30mm Width). D flip flop is embedded in the Tape & Reel (TR) package. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~3.6V. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. The 74LVCseries comprises this type of FPGA. It should not exceed 100MHzin its output frequency. The list contains 1 elements. Despite external influences, it consumes 10μAof quiescent current. Currently, there are 20 terminations. The 74LVC374family includes it. The D flip flop is powered by a voltage of 1.8V . The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of LVC/LCX/Z. Surface Mount mounts this electronic component. This board is designed with 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. This flip flop is designed with 8 Bits. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). To achieve this superior flexibility, 8 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. It runs on 3.3Vvolts of power. This D flip flop is equipped with 0 ports. This T flip flop features a maximum design flexibility due to its output current of 24mA. This input has 2lines in it.

SN74LVC374ADBRE4 Features

Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
3.3V power supplies

SN74LVC374ADBRE4 Applications

There are a lot of Texas Instruments SN74LVC374ADBRE4 Flip Flops applications.

• Data storage
• Power down protection
• Storage Registers
• Frequency Divider circuits
• Shift Registers
• Latch-up performance
• 2 – Bit synchronous counter
• Memory
• Registers
• Instrumentation