SN74LVC374AQPWRQ1 Overview

The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. A package named Tape & Reel (TR)includes it. Tri-State, Non-Invertedis the output configured for it. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 2V~3.6Vsupply voltage is required for it to operate. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. This type of FPGA is a part of the Automotive, AEC-Q100, 74LVC series. This D flip flop should not have a frequency greater than 100MHz. The element count is 1 . This process consumes 10μA quiescents. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74LVC374 family contains it. The power supply voltage is 2.7V. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 8bits in its design. A normal operating voltage (Vsup) should remain above 2V. Its superior flexibility is attributed to its use of 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.

SN74LVC374AQPWRQ1 Features

Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
20 pins
8 Bits

SN74LVC374AQPWRQ1 Applications

There are a lot of Texas Instruments SN74LVC374AQPWRQ1 Flip Flops applications.

• Data storage
• Circuit Design
• Frequency division
• Buffered Clock
• Convert a momentary switch to a toggle switch
• Bus hold
• Reduced system switching noise
• Synchronous counter
• Memory
• Storage Registers