SN74LVC574ANSR Overview

It is embeded in 20-SOIC (0.209, 5.30mm Width) case. D flip flop is included in the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. A 1.65V~3.6Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~125°C TA. This D latch has the type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. There should be no greater frequency than 150MHzon its output. In total, it contains 1 elements. There is 10μA quiescent consumption. Currently, there are 20 terminations. The 74LVC574 family contains it. A voltage of 1.8V is used as the power supply for this D latch. JK flip flop input capacitance is 4pF farads. A device of this type belongs to the family of LVC/LCX/Z. It is mounted in the way of Surface Mount. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with a number of bits of 8. Due to its superior flexibility, it uses 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. This D flip flop is equipped with 0 ports. The 24mA output current allows it to be designed with the greatest amount of flexibility. As of now, there are 3input lines. It consumes 1.5μA of quiescent current without being affected by external factors.

SN74LVC574ANSR Features

Tape & Reel (TR) package
74LVC series
20 pins
8 Bits

SN74LVC574ANSR Applications

There are a lot of Texas Instruments SN74LVC574ANSR Flip Flops applications.

• Latch
• Counters
• Buffer registers
• Individual Asynchronous Resets
• Count Modes
• Frequency division
• Bounce elimination switch
• ESD performance
• ATE
• Buffered Clock