SN74LVC574AQPWREP Overview

As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. In this case, the operating temperature is -40°C~125°C TA. This D latch has the type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. A frequency of 150MHzshould not be exceeded by its output. A total of 1elements are present in it. As a result, it consumes 10μA of quiescent current without being affected by external factors. 20terminations have occurred. The object belongs to the 74LVC574 family. Power is supplied from a voltage of 2.7V volts. JK flip flop input capacitance is 4pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. Electronic part Surface Mountis mounted in the way. 20pins are included in its design. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. The supply voltage (Vsup) should be kept above 2V for normal operation. In light of its reliable performance, this T flip flop is well suited for TR. The D latch runs on a voltage of 3.3V volts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74LVC574AQPWREP Features

Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
3.3V power supplies

SN74LVC574AQPWREP Applications

There are a lot of Texas Instruments SN74LVC574AQPWREP Flip Flops applications.

• ESD protection
• Automotive
• Cold spare funcion
• Count Modes
• ESD performance
• Consumer
• Load Control
• Data transfer
• ESCC
• Divide a clock signal by 2 or 4