SN74LVC74ADBR Overview

As a result, it is packaged as 14-SSOP (0.209, 5.30mm Width). It is included in the package Cut Tape (CT). T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~3.6Vvolts. In this case, the operating temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. Its output frequency should not exceed 150MHz Hz. Despite external influences, it consumes 10μAof quiescent current. There have been 14 terminations. You can search similar parts based on 74LVC74. The power source is powered by 1.8V. Input capacitance of this device is 5pF farads. The electronic device belongs to the LVC/LCX/Zfamily. It is mounted in the way of Surface Mount. It is designed with 14 pins. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. Vsup reaches 3.6V, the maximal supply voltage. Using 2 circuits, it is highly flexible. Due to its reliability, this T flip flop is well suited for TR. It runs on 3.3Vvolts of power. With an output current of 24mA, it is possible to design the device in any way you want. It is designed with 1 output lines.

SN74LVC74ADBR Features

Cut Tape (CT) package
74LVC series
14 pins
3.3V power supplies

SN74LVC74ADBR Applications

There are a lot of Texas Instruments SN74LVC74ADBR Flip Flops applications.

• Synchronous counter
• High Performance Logic for test systems
• Count Modes
• ESCC
• Individual Asynchronous Resets
• ATE
• ESD protection
• Bus hold
• Registers
• Circuit Design