CY74FCT825ATSOC Overview

It is embeded in 24-SOIC (0.295, 7.50mm Width) case. As part of the package Tube, it is embedded. This output is configured with Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.75V~5.25V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74FCT series. D latch consists of 1 elements. As a result, it consumes 200μA quiescent current and is not affected by external forces. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74FCT825family make up this object. It is powered from a supply voltage of 5V. The input capacitance of this JK flip flopis 5pF farads. The electronic device belongs to the FCTfamily. It is mounted by the way of Surface Mount. There are 24pins on it. This device's clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. A power supply of 5Vis required to operate it. There are 2 ports embedded in the flip flops. High efficiency requires the supply voltage to be maintained at 5V. It offers maximum design flexibility with its output current of 62mA. The number of input lines is 8.

CY74FCT825ATSOC Features

Tube package
74FCT series
24 pins
8 Bits
5V power supplies

CY74FCT825ATSOC Applications

There are a lot of Texas Instruments CY74FCT825ATSOC Flip Flops applications.

• Test & Measurement
• Frequency Dividers
• Differential Individual
• Bounce elimination switch
• Single Up Count-Control Line
• Asynchronous counter
• Individual Asynchronous Resets
• Digital electronics systems
• Dynamic threshold performance
• Shift registers