SN74LVC821ADWG4 Overview

The package is in the form of 24-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~3.6V. A temperature of -40°C~85°C TAis used in the operation. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74LVC series. Its output frequency should not exceed 150MHz Hz. There are 1 elements in it. As a result, it consumes 10μA quiescent current. Terminations are 24. D latch belongs to the 74LVC821 family. Power is supplied from a voltage of 1.8V volts. This JK flip flop has a 5pFfarad input capacitance. This D flip flop belongs to the family of LVC/LCX/Z. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 24. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. An electronic part designed with 10bits is used in this application. 3.6Vis the maximum supply voltage (Vsup). The superior flexibility of this product is achieved by using 10 circuits. It runs on 3.3Vvolts of power. The D flip flop is embedded with 2ports. It offers maximum design flexibility with its output current of 24mA.

SN74LVC821ADWG4 Features

Tube package
74LVC series
24 pins
10 Bits
3.3V power supplies

SN74LVC821ADWG4 Applications

There are a lot of Texas Instruments SN74LVC821ADWG4 Flip Flops applications.

• Modulo – n – counter
• Buffered Clock
• ESCC
• Dynamic threshold performance
• Counters
• Event Detectors
• Power down protection
• Balanced 24 mA output drivers
• Differential Individual
• Load Control