SN74LVC823APWR Overview

24-TSSOP (0.173, 4.40mm Width)is the way it is packaged. A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~3.6V. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 150MHz. There are 1 elements in it. T flip flop consumes 10μA quiescent energy. There have been 24 terminations. It is a member of the 74LVC823 family. A voltage of 1.8V is used as the power supply for this D latch. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the LVC/LCX/Zfamily are electronic devices. Surface Mount mounts this electronic component. This board has 24 pins. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to Bus Driver/Transceiver base part number. The design is based on 9bits. This D flip flop is well suited for TR based on its reliable performance. The flip flop has 2ports embedded within it. With an output current of 24mA, it is possible to design the device in any way you want. To operate, the chip has a total of 3 output lines. It has 9lines. Furthermore, it has WITH CLEAR AND CLOCK ENABLEas a characteristic.

SN74LVC823APWR Features

Tape & Reel (TR) package
74LVC series
24 pins
9 Bits

SN74LVC823APWR Applications

There are a lot of Texas Instruments SN74LVC823APWR Flip Flops applications.

• Data transfer
• Consumer
• Storage Registers
• High Performance Logic for test systems
• Registers
• Digital electronics systems
• Synchronous counter
• Patented noise
• Balanced 24 mA output drivers
• Common Clocks