SN74LVTH273PWE4 Overview
The flip flop is packaged in a case of TSSOP. It is configured with TTLas an output. D latch consists of 1 elements. Terminations are 20. The power source is powered by 3.3V. Electronic devices of this type belong to the LVTfamily. Electronic part Surface Mountis mounted in the way. With its 20pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. In order to ensure high efficiency, the supply voltage should remain at 3.3V. It is set to -32mAfor the high level output current. It is set to 64mAfor the low level output current. If the operating temperature is lower than 85°C, it is recommended. It should be higher than -40°Cwhen the system is operating. Normally, it operates with a voltage of 2.7VV as its minimum supply voltage. It supports a maximum supply voltage of 3.6V volts. This frequency can be achieved 150MHz. In this case, it uses a D FLIP-FLOP logic IC. It is equipped with 1 functions . The D latch is equipped with 20 pins. As a result of its output current of 64mA, it is very flexible in terms of design.
SN74LVTH273PWE4 Features
20 pins
1 Functions
20 pin count
SN74LVTH273PWE4 Applications
There are a lot of Texas Instruments
SN74LVTH273PWE4 Flip Flops applications.
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
