SN74LVTH273PWG4 Overview
In the form of TSSOP, it has been packaged. T flip flop uses TTLas its output configuration. A total of 1elements are contained within it. The number of terminations is 20. An input voltage of 3.3Vpowers the D latch. In this case, the D flip flop belongs to the LVTfamily. There is an electronic component mounted in the way of Surface Mount. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. In order to achieve high efficiency, the supply voltage should be maintained at 3.3V. In this case, the high level output current is set to -32mA. 64mAis set as the low level output current. There should be a temperature below 85°Cduring operation. In order for the system to operate properly, the temperature should be higher than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 2.7VV. There is a maximum voltage support of 3.6V. A frequency of 150MHzcan be achieved. D FLIP-FLOPis the logic IC it uses. There are 1 functions available on this T flip flop. A total of 20 pins are present on this device. Its output current of 64mA allows for maximum design flexibility.
SN74LVTH273PWG4 Features
20 pins
1 Functions
20 pin count
SN74LVTH273PWG4 Applications
There are a lot of Texas Instruments
SN74LVTH273PWG4 Flip Flops applications.
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
