SN74LVTH574NSR Overview

20-SOIC (0.209, 5.30mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 2.7V~3.6V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74LVTH series. It should not exceed 150MHzin its output frequency. A total of 1 elements are present. As a result, it consumes 190μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. You can search similar parts based on 74LVTH574. The D flip flop is powered by a voltage of 3.3V . The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the LVTfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. It is designed with 8bits. It is imperative that the supply voltage (Vsup) is maintained above 2.7Vin order to ensure normal operation. The superior flexibility of this circuit is achieved by using 8 circuits. Considering the reliability of this T flip flop, it is well suited for TR. This D flip flop is equipped with 0 ports. In order to achieve high efficiency, the supply voltage should be maintained at 3.3V. As a result of its output current of 64mA, it is very flexible in terms of design. In order for the chip to function, it has 3output lines.

SN74LVTH574NSR Features

Tape & Reel (TR) package
74LVTH series
20 pins
8 Bits

SN74LVTH574NSR Applications

There are a lot of Texas Instruments SN74LVTH574NSR Flip Flops applications.

• Buffered Clock
• Divide a clock signal by 2 or 4
• Load Control
• Parallel data storage
• Computing
• Clock pulse
• Communications
• ATE
• Bounce elimination switch
• Patented noise