SN74LVTH574PW Overview

As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tube. As configured, the output uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2.7V~3.6V volts. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74LVTH series. In order for it to function properly, its output frequency should not exceed 150MHz. In total, it contains 1 elements. As a result, it consumes 190μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74LVTH574 family. A voltage of 3.3V provides power to the D latch. Its input capacitance is 3pF farads. The electronic device belongs to the LVTfamily. The electronic part is mounted in the way of Surface Mount. This board has 20 pins. This device's clock edge trigger type is Positive Edge. This part is included in Bus Driver/Transceiver. Flip flops designed with 8bits are used in this part. For normal operation, the supply voltage (Vsup) should be kept above 2.7V. Its superior flexibility is attributed to its use of 8 circuits. The flip flop contains 2ports. In order to achieve high efficiency, the supply voltage should be maintained at 3.3V. Its output current of 64mAallows for maximum design flexibility. In order to operate, the chip has 3 output lines.

SN74LVTH574PW Features

Tube package
74LVTH series
20 pins
8 Bits

SN74LVTH574PW Applications

There are a lot of Texas Instruments SN74LVTH574PW Flip Flops applications.

• Latch-up performance
• Synchronous counter
• CMOS Process
• Single Up Count-Control Line
• Latch
• ATE
• Common Clocks
• Bounce elimination switch
• Memory
• High Performance Logic for test systems