SN74LVTH574RGYR Overview

It is embeded in 20-VFQFN Exposed Pad case. D flip flop is included in the Cut Tape (CT)package. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A voltage of 2.7V~3.6Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74LVTH series. It should not exceed 150MHzin terms of its output frequency. A total of 1elements are contained within it. As a result, it consumes 190μA of quiescent current without being affected by external factors. Terminations are 20. D latch belongs to the 74LVTH574 family. The power supply voltage is 3.3V. Its input capacitance is 3pFfarads. LVTis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. 8bits are used in its design. A normal operating voltage (Vsup) should remain above 2.7V. In order to achieve its superior flexibility, 8 circuits are used. Considering the reliability of this T flip flop, it is well suited for TR. The flip flop contains 2ports. The supply voltage should be maintained at 3.3V for high efficiency. As a result of its output current of 64mA, it is very flexible in terms of design. In order to operate, the chip has 3 output lines.

SN74LVTH574RGYR Features

Cut Tape (CT) package
74LVTH series
20 pins
8 Bits

SN74LVTH574RGYR Applications

There are a lot of Texas Instruments SN74LVTH574RGYR Flip Flops applications.

• Set-reset capability
• Frequency Divider circuits
• Counters
• Computers
• ESD performance
• Load Control
• ATE
• Instrumentation
• Bounce elimination switch
• CMOS Process