SUPPORTS SINGLE-ENDED AND LOW-VOLTAGE DIFFERENTIAL SCSI
HTS Code
8542.39.00.01
Subcategory
Line Driver or Receivers
Technology
CMOS
Voltage - Supply
4.75V~5.25V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
9
Supply Voltage
5V
Terminal Pitch
0.635mm
Reach Compliance Code
unknown
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
75LVDM977
Pin Count
56
Qualification Status
Not Qualified
Power Supplies
5V
Supply Current-Max
26mA
Differential Output
YES
Input Characteristics
DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers
9/9
Driver Number of Bits
9
Receiver Number of Bits
9
Interface Standard
X3.277; SCSI-2; SCSI-3
Receive Delay-Max
10 ns
Transmit Delay-Max
8.8 ns
Output Low Current-Max
0.002A
Out Swing-Min
0.2 V
High Level Input Current-Max
0.00005A
Height Seated (Max)
2.79mm
Length
18.415mm
Width
7.5mm
RoHS Status
ROHS3 Compliant
SN75LVDM977DLRG4 Product Details
SN75LVDM977DLRG4 Overview
Due to the enhanced 56-BSSOP (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.The Tape & Reel (TR) package houses this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.Power supply for this differential driver is 4.75V~5.25V.The field can have up to 9/9 eligible receivers/drivers at once when using this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.With a voltage range of 5V, this driver IC can operate efficiently.56 terminations are integrated into this wide receiver for driving and receiving signals from data.It is packaged with 56 pinouts that are market standard for this particular transceiver.As the base part number 75LVDM977 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 56-pin driver IC with enhanced power dissipation control.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.It is important to note that this ic receiver had a maximum resolution of 9 bits.There are typically 9 bits of resolution specified in the specifications of this receiver.There is a subcategory called Line Driver or Receivers for this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.With the SUPPORTS SINGLE-ENDED AND LOW-VOLTAGE DIFFERENTIAL SCSI function, this optical transceiver module improves accuracy and stability of signal management overall.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 26mA of input current.