THS4130IDGKG4 Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp of this type is a Differential-type. A Tube case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are located on this board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 8 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 12.3mA. There should be no change in the voltage gain at 78dB. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 15V voltage. Op amp resistance should stay within the range of 34MOhm.
THS4130IDGKG4 Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4130IDGKG4 Applications
There are a lot of Texas Instruments THS4130IDGKG4 Instrumentational OP Amps applications.
- Vehicle electronics
- Proportional operation circuits
- Industrial control system
- ECG equipment
- Portable docking station
- High speed sample
- Measurements of Wheatstone bridge
- Weak signal detection
- Test and measurement instruments
- Weighing systems
