TL1451ACDBR Overview

It comes in the 16-SSOP (0.209, 5.30mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Cut Tape (CT) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's3.6V~50V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -20°C~85°C TA rating. In this switching controller, the switch can be set to 1kHz~500kHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of terminations with 16 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. You can find other relevant dc to dc converter ics by searching "TL1451". In total, switching converter has 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, the DC regulator outputs 50V voltage. It's important to remember that the dc dc regulator's normaloutput current is 3A, so you should note it down when starting a new project. A frequency of 500kHz is used by the switching controller. It is suggested that users apply 50V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. DC switchings that are dormant use 1.7mA. The maximum input voltage of dc switcher is 50V, so users should limit their voltage accordingly. Switching controller is necessary to supply a voltage of 6V. Voltage 3.6V is necessary for the supply. There will be 3A current output from the dc switcher above 3A. The switching converter can output 50V volts at its utmost, according to the datasheet. At its lowest voltage, the voltage controller does not produce less than 1V.

TL1451ACDBR Features

Transistor Driver Outputs
Switching Frequency: 1kHz~500kHz
Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz

TL1451ACDBR Applications

There are a lot of Texas Instruments TL1451ACDBR DC to DC converter applications.

• Energy management systems
• Gear/thread machining machines
• Textile machinery
• Electric water heaters
• Precision electronic equipment
• Correction machines
• Automation technology
• Milling machines
• Smoke prevention equipment
• Terrestrial set-top boxes